Racing Costs

Spec Miata Suspension Setup Cost: $2,360 Kit, $400 Alignment

Jett Johnson8 min read

The short answer

  • The spec suspension parts come to about $2,360 at Mazda's published list prices: Penske shocks, mounts, Eibach springs, sleeves and sway bars.
  • Add adjustable end links, Delrin offset bushings and isolators and it's closer to $2,650.
  • Setting it up costs money too. One published shop menu charges $150 for an alignment and $250 for corner balancing: $400 together.
  • Your own corner scales run about $2,125 on sale. That's roughly nine corner-balance sessions at $250, so they only pay off if you set up often.

A Spec Miata suspension costs about $2,360 in parts at Mazda Motorsports' published prices, before anybody touches a wrench. Then you pay again to set it up: plan on around $400 for an alignment and corner balance at a shop.

That's the whole answer. The rest of this post is the line items, what's optional, and when it makes sense to buy the tools yourself.

LeadFoot Racing Spec Miata #121 exiting a corner over the curbing at High Plains Raceway Our #121 rolling off the curbing at High Plains Raceway, August 2026. It runs the Penske package priced below.

Why can't you just buy any coilovers for a Spec Miata?

Because it's a spec class. That's the point of it.

The shocks, springs and sway bars are sold as a set package through Mazda Motorsports. Penske Racing Shocks became the class shock in 2019. Mazda's announcement says the Penske is sealed and tamper-proof, legal in SCCA and NASA, and required at championship events. Penske's own store lists the Spec Miata shock as sold exclusively through Mazda Motorsports.

So you're not shopping brands. You're buying one parts list. That makes the cost easy to predict, which is rare in racing.

One warning if you're buying a used car: older cars may still have the earlier Bilstein package. Whether that's legal at your event is a rules question, not a price question. Check the current SCCA GCR and NASA Spec Miata rules for the level you race before you pay for the car. Our used Spec Miata buyer's guide covers what else to check.

How much does the Spec Miata suspension kit cost?

Here's the core kit, built from Mazda Motorsports' published Spec Miata suspension parts list. Prices are their listed numbers (list dated March 2021). The $336 threaded-body shock price was repeated in Mazda's May 2024 notice, when they started phasing out the older smooth-body shock.

PartQtyPrice eachTotal
Penske threaded-body coil-over shock, front2$336$672
Penske threaded-body coil-over shock, rear2$336$672
Shock mount bushing kit (Penske only)1 set$282$282
Eibach spring, 700 lb front2$65$130
Eibach spring, 325 lb rear2$65$130
Coil-over sleeve kit1 set$235$235
Eibach sway bar kit, front and rear (1999-2005)1$239$239
Core total$2,360

If you have a 1994-1997 car, the sway bar kit is $229, so the core total drops to $2,350.

Mazda now shows current prices only to logged-in racers, so treat these as a planning number, not a quote. Log in and price it before you budget.

What else do most people add?

These aren't the core kit, but they show up on a lot of builds because they make the car easier to align and adjust. Same price list:

Add-onPriceWhat it's for
Adjustable sway bar end links, kit of 4$140Lets you set the bars with no preload
Offset bushings, Delrin set$98More camber and caster adjustment
Offset bushings, urethane set$59Cheaper version of the same job
Coilover spring isolators$15 eachSeats the spring on the perch
Subframe braces, pair$351990-1993 cars (1994 and up have them)

Core kit plus end links, Delrin bushings and four isolators lands at about $2,650. Mazda also lists NB top hats at $27.23 each for the cars that need them.

If you're building a Spec Miata from a donor car, this is one line in a much bigger list. It's a predictable line, which helps.

LeadFoot Racing Spec Miata #19 head-on through a corner at High Plains Raceway The #19 loaded up mid-corner at High Plains Raceway. Every number in the setup sheet shows up right here.

How much does a Spec Miata alignment and corner balance cost?

New parts don't make a fast car. Setup does. And Mazda's baseline needs two jobs done together: corner weights on scales and an alignment.

Here's what one race-alignment shop publishes. PTUNING in Manassas, Virginia lists a four-wheel alignment at $150 and corner balancing at $250, charged separately. That's $400 for the full job. Their custom alignments include ballast for the driver's weight, which you want.

That lines up with what owners report. In one Rennlist thread (Porsche owners, but the same job), people paid $200 to $400 for a corner balance plus alignment, usually in 1 to 4 hours. One owner paid $400 for 3.5 hours, with him sitting in the car.

Prices move a lot by region and shop. Call ahead and ask three things:

  • Do you corner balance with the driver in the seat, or with ballast?
  • Do you disconnect the sway bars first?
  • Will I get the before and after numbers printed?

If a shop can't say yes to all three, it's a street alignment rack, not a race setup.

Installing the kit is a separate bill if you don't do it yourself. At a Colorado shop rate like 5250 Performance's $240 an hour, ask for the quote in hours before anything comes apart.

Should you buy your own corner scales?

Maybe. Do the math first.

A set of Longacre Elite Pro Wireless scales was $2,124.99 at Summit Racing on November 18, 2026 (marked down from $2,499.99). At $250 per corner balance, that's about nine shop sessions before the scales pay for themselves.

OptionUpfrontPer setup
Shop alignment + corner balance$0About $400 (published example)
Own scales, shop alignmentAbout $2,125About $150
Own scales and alignment toolsAbout $2,125 plus toolsYour time

Scales make sense if you set up the car several times a season, after contact, after a part swap, or before a different track. If you set it up once in spring and leave it, the shop is cheaper.

The Penske shocks also need care down the road. Penske suggests an inspection after 100 hours of track time, which Mazda puts at about 25 typical race weekends. At launch in 2018, a rebuild was $100 a shock through Penske. Check today's price before you budget it.

What we actually do

Our #121 runs the Penske package. Our second car runs Bilsteins. Both start from the same thing: Mazda Motorsports' published baseline setup, not a forum post.

We follow Mazda's order of operations every time. Sway bars disconnected. Ride height, then corner weight, then ride height again. Caster, then camber, then corner weight again. Toe last. Bars back on.

The baseline is about 50.5% cross weight, -3.0 to -3.4 degrees of front camber and -2.5 to -2.8 rear. After that, we change one thing at a time and write it down. Our High Plains setup notes and Pueblo setup notes show what we move at each track.

The log is the cheap part that saves the expensive part. A $400 setup is wasted if nobody wrote down the numbers. We built the free Race Day Ready Pack around that, with the checklists and setup sheets we use so nothing gets remembered wrong on the tow home.

The honest bottom line

Budget about $2,360 for the spec parts, about $2,650 with the common add-ons, and about $400 each time a shop sets it up. It's one of the most predictable bills in a Spec Miata season.

But a perfectly corner-balanced car still needs a driver who knows what to do with it. Setup is the last few tenths. The driver is the rest.

If you want the way we teach that side in one place, The Driver System is $47. It has 65 driving guides and tools plus the Pocket Cards, so the money you put into the car shows up on the lap timer.


Sources: Mazda Motorsports: Spec Miata Suspension Parts List (March 2021), Mazda Motorsports: Phase Out of Smooth Body Spec Miata Penske Shock (May 2024), Mazda Motorsports: Spec Miata Suspension Evolving (August 2018), Mazda Motorsports: Penske Shocks Upgrade on Way to NASA and SCCA (August 2018), Mazda Motorsports: Spec Miata Baseline Setup, Mazda Motorsports Spec Miata Parts, Penske Racing Shocks: Spec Miata shock, PTUNING service pricing, Summit Racing: Longacre Elite Pro Wireless Scales, Rennlist corner balance and alignment thread. Prices checked November 2026. Mazda's current parts prices are behind a racer login, so confirm them before you order. Any specific cost or rule claims in this post are based on these sources plus my own racing experience.

Do you believe?

LeadFoot Racing logo

About the author

Jett Johnson

Founder of LeadFoot Racing, a Spec Miata race team in Colorado Springs that races in the NASA Rocky Mountain region. Jett holds degrees in mechanical engineering, mathematics and aerospace engineering, has raced since 2022 and has spent years working with sponsors in motorsport. What you read here comes from building the team's race cars, running race weekends and writing real sponsorship proposals.

Meet the team

Free download

Race Data & Coaching Basics

How to actually get faster without being an engineer.

  • ✓The only three data channels that matter to start
  • ✓How to find one fixable mistake per session
  • ✓A debrief framework you can use this weekend
ProgramSponsorsFree GuideApply