Racing Costs

Roll Cage Cost 2026: Bolt-In vs Welded Price Ranges

Jett Johnson7 min read

The short answer

  • A bolt-in Miata roll bar lists for $360 to $710 at Moss Miata, before freight. Moss adds a $266.41 oversize fee on its $360 Hard Bar.
  • A bolt-in 6-point cage runs about $1,275 for popular cars (Autopower), plus $340 to $395 in freight outside California.
  • A weld-in Spec Miata kit is $1,359 (Pegasus) to $1,925 shipped (Miatacage). Miatacage says install takes 18 to 20 hours for one person with fab skills.
  • Paying a shop changes the math. NASA Rally Sport puts a basic custom cage with seat mounts at $2,500 to $4,000.

A bolt-in roll bar costs about $360 to $710 for a Miata. A bolt-in cage runs around $1,275 plus freight. A weld-in cage kit is $1,359 to $1,925, and the welding is where the real money goes.

So the honest answer to "how much is a roll cage" is two numbers: the steel, and the hours to put it in. Here are both, from live 2026 listings.

LeadFoot Racing Spec Miata #19 side profile at speed, High Plains Raceway Number 19 at High Plains Raceway, August 2026. Every tube you can't see from here is part of the price of a race car.

This post is about price only. If you're asking whether you even need a cage for a track day, start with do you need a roll cage for a track day. That one covers the HPDE, convertible and wheel-to-wheel rules.

How much does a bolt-in roll bar cost?

A roll bar is a main hoop behind the seats with braces going back. No front hoop, no door bars. It's the common upgrade for a convertible that runs HPDE or time trials.

Miatas have the most choices, so here are real Miata listings:

Bolt-in roll barWhere the price came fromPrice
Hard Dog Hard Bar (NA/NB)Moss Miata, Nov 2026$360 + $266.41 oversize fee
Hard Dog Sport M2 (NA/NB)Moss Miata, Nov 2026from $535
Hard Dog Hardcore M1 (NA)Moss Miata, Nov 2026from $710

The gap isn't just brand. Moss lists the Hardcore M1 as "SCCA & NASA Approved." It doesn't list either approval for the cheaper Hard Bar, which Moss pitches for "street, autocross, and track use." Buy the bar your event's rules accept, or you'll buy two bars.

Install is mostly drilling and trim work, not welding. Moss's Hard Dog guide covers trim removal and drilling. It recommends a pro if you're nervous about cutting your car.

How much does a bolt-in roll cage cost?

A bolt-in cage adds the front hoop and more braces. You bolt it to plates in the floor instead of welding it to the body.

Autopower is the big name here. Their 6-point bolt-in cages list at $1,499.96 and sell for about $1,275 for popular cars like the 1978-1985 RX-7 and the 2004-2006 GTO.

Then add freight. A cage is too big for normal shipping. Accesspeed quotes $340 to $395 to ship a roll cage outside California. From here in Colorado, that's the bill you'd pay.

Read the fine print on "bolt-in," too. The GTO listing says most applications "require NO WELDING." The same page says the diagonal and horizontal braces "are a permanent weld-in design." Budget for a welder anyway.

How much does a weld-in roll cage cost?

This is the cage that goes in a real wheel-to-wheel race car. It's welded to the chassis at multiple points, with door bars on both sides.

Weld-in cage kitWhere the price came fromPrice
Pegasus Spec Miata kit, 0.120" wall DOM tubePegasus Auto Racing, Nov 2026$1,359 + freight collect
Miatacage V4 kit, door bars, perches, 14 gussetsMiatacage.com, Nov 2026$1,925 shipped ($1,625 + $300 shipping)

The kits look cheap next to a finished race car. That's because a kit is tubing, not a cage. Pegasus says its kit "requires some final fitting and trimming." It also says you lose the convertible top for good.

Small extras pile up fast. Miatacage lists roll bar padding at $25 per 3 feet and a full window net mounting kit at $110 (sale prices). Its rear X-brace adds $175.

What does roll cage installation cost?

Labor is the biggest number and the hardest to pin down. Here's what the sources actually say:

  • Kit, your own welding: Miatacage says its kit takes 18 to 20 hours for one person with some fabrication skills. Your cost is the kit plus your time.
  • Kit, shop welding: A UK cage-fitting guide (updated October 2026) puts a weld-in kit on a stripped shell at 10 to 20 hours. If the shop also strips and refits the interior, it's 30 to 40 hours.
  • Fully custom cage: The same guide says 40 to 70 hours. NASA Rally Sport says to expect $2,500 to $4,000 for a basic custom rally cage and seat mounts. It adds that you can spend $10,000 on a cage and shell prep.

Multiply those hours by your local shop's rate, and you have your real number. Ask whether the price includes stripping the car. That one line can double the hours.

How do bolt-in and welded cages compare on total cost?

Here's the side-by-side. The totals are my arithmetic from the prices above, not quotes:

OptionPartsLaborRough total
Bolt-in roll bar (Miata)$360-$710 + freightA few hours, often DIYFrom about $630 with freight
Bolt-in cage (Autopower)$1,275 + $340-$395 freightDIY bolts, plus some weldingAbout $1,600-$1,700 + welding
Weld-in kit, you weld it$1,359-$1,92518-20 of your own hoursAbout $1,400-$2,000
Weld-in kit, shop welds it$1,359-$1,92510-40 shop hoursKit + your shop's bill
Custom cage, shop-builtIncluded40-70 hours$2,500-$4,000+ (rally, basic)

A cheap cage is the bar that passes tech at your event. Every other cage is a cage you pay for twice.

What we actually do

Both our Spec Miatas run full welded cages, built to the rulebook. That's not an upgrade for us. It's the line between a street car and a race car.

Here's how we think about cage money:

  • The cage is the build. No Money Motorsports calls the cage "the single biggest driver of cost" in a cheap Spec Miata. We walked through why in our NA Spec Miata build, part by part.
  • A caged car is often the cheaper path. When you buy a used race car, the cage is already paid for. Check the logbook number against the cage stamp first. Our used race car buying checklist shows you how.
  • Do the math before you pick up a welder. If you're thinking about caging a donor car yourself, run the donor-car build numbers first. The cage is one line on a long list.

If you're still on track days and your car has a fixed roof, you probably don't need any of this yet. Spend the money on seat time.

When your first race weekend gets close, grab the free Race Day Ready Pack. It's the checklists we use, so nothing gets missed at tech.


Sources: Moss Miata, Hard Bar by Hard Dog, Moss Miata, Sport M2 Bars by Hard Dog, Moss Miata, Hardcore M1 Bars by Hard Dog, Moss Miata, choosing a Hard Dog roll bar, Accesspeed, Autopower 83591 bolt-in cage, 1978-1985 RX-7, Accesspeed, Autopower 83154 bolt-in cage, 2004-2006 GTO, Pegasus Auto Racing, Spec Miata roll cage kit, Miatacage, roll cage kit, Sportseats4u, roll cage fitting cost guide (UK, updated October 2026), NASA Rally Sport, roll cage guidance, and the No Money Motorsports Spec Miata buyer's guide (cage as the biggest cost driver). Listing prices checked November 2026. Prices change, freight varies by address, and the totals table is my arithmetic, not a quote. Get a written, out-the-door quote from a local fabricator before you budget.

Do you believe?

LeadFoot Racing logo

About the author

Jett Johnson

Founder of LeadFoot Racing, a Spec Miata race team in Colorado Springs that races in the NASA Rocky Mountain region. Jett holds degrees in mechanical engineering, mathematics and aerospace engineering, has raced since 2022 and has spent years working with sponsors in motorsport. What you read here comes from building the team's race cars, running race weekends and writing real sponsorship proposals.

Meet the team

Free download

25 Sponsorship Email Templates

The cold-email templates that actually get replies from racing sponsors.

  • ✓First-touch, follow-up, breakup — 25 in total
  • ✓Subject lines that don't read like spam
  • ✓Tested against real LFR send data
ProgramSponsorsFree GuideApply